Tube Control Amplifier Kit

• No compromise high-end design
• 4 inputs
• Exclusive, high finish, solid aluminum enclosure
• High quality ALPS volume potentiometer
• Full tube design
• Auto muting (warm up) at power on

Features
Highly reliable reed relay input selection Separate left and right input section Programmable level adjustment: +6dB for each input Regulated DC filament supply Output mute function Switchable monitor output (for tape, CDR, MD,...)
Specifications Input sensitivity for 0dB (0.775Vrms) out: approx. 200mV / 50Kohm. Maximum output level: 35Vpp. Output load impedance: 10K or higher. Signal to noise ratio (A-weighted ref. 0dB out): 100dB. Total harmonic distortion: Gain: x2 or x4(+ 6dB on). Frequency response: 7Hz to 150kHz (-3dB) @ x2 gain 18Hz to 55kHz within 0.3dB. Channel separation: 85dB @ 0dB in. Input cross talk: < -100dB @ 0dB in. AC power: 115V AC (100V to 120V). Consumption: 16W max. Dimensions: 11.4" x 6.5" x 2.7". Weight (net): 6lb.
K8020 is kit, M8020 is assembled.